每次使用完结后都会有基本的检查步骤，清点吊索具的使用状态，浦泰以常见的吊索具为例，来和大家聊聊使用状态主要从哪些方面进行判断。 Common slings
such as slings, shackles, hooks and other common slings
will have basic inspection steps after each use, and check the use status of the slings. Putai takes common slings as an example to talk with you From what aspects of the state to judge.
Sling exmpc.com copyright by: exmpc.com
The webbing (including the protective cover) is severely worn, perforated, cut, torn, the load-bearing seam is fluffed, and the seam is worn.
Sling fibers are softened, aging, elasticity is reduced, strength is weakened. Rough fiber surface is easy to peel off. Slings appear dead knots. The surface of the slings has excessive spot looseness, corrosion, acid and alkali burnout, and hot melt or burn. Line bare
There is obvious permanent deformation or the shaft pin cannot rotate freely. The cross-section wear of any part of the buckle body and the shaft pin is more than 10% of the original size. There is a crack in any part of the shackle. The shackle cannot be locked.
Dangerous section wear or corrosion up to 10% of original size
Hook handle produces plastic deformation and the opening degree is increased by 10% than the original size
Hook body twist angle exceeds 10 °
The examples of common sling inspection are briefly introduced above. If customers and friends want to know more about sling operation, they are welcome to interact with Putai staff. Professional service staff will give the best answers. .