有限公司 Taizhou Putai Rigging Co., Ltd.
National 24-hour consultation hotline 19825502651
Free consultation hotline19825502651
The complete set of steel wire rope rigging is mainly composed of metal end pieces such as main rings, shackles, (plaited) pressed wire ropes and hooks. According to different customer requirements, it can be combined into single-limb, double-limb, three-limb, four-limb wire rope rigging, etc. Various metal accessories can be flexibly matched and selected according to actual needs, which is convenient to use and high in safety. The main rings include long rings, round rings, combined rings, etc .; connection shackles include bow-shaped shackles, D-shaped shackles, heavy shackles, etc .; wire ropes include pressing and plaiting; metal end pieces include hooks and other metal pieces; Wire rope rigging can be freely combined according to customer requirements.
Pay attention to the relationship between the included angle and the tonnage during use. The larger the included angle, the lower the tonnage, and the included angle must not be greater than 120 degrees. The applicable temperature is between -40 and 100 degrees. It must not be exposed to corrosive gas, liquid or steam. Overload use is strictly prohibited. Shackles, rings, wire ropes and other metal parts must be connected using shackles with the same rated load. When the wire ropes or metal accessories meet the scrap standards, they should not be used. For rigging with a storage period of more than two years, a tensile test is required, and it can be used only after passing the inspection.