Inset wire rope sling (PT0203) detailed introduction:
Patchwork wire rope patchwork rope
Method for manually inserting wire rope
① This method stipulates that a six-strand steel wire rope with alternately twisted fiber cores or steel wire cores is manually inserted into a wire rope connecting device (commonly known as a hook head) equipped with a loop.
② The connector is made by five times of insertion, and the five times of insertion can be composed of three whole strands and two reduced strands. All splices shall be opposite to the twisting direction of the wire rope; with the exception of the first group, the ends of all strands inserted in the other groups shall be opposite to the twisting direction of the raw steel wire.
③ Intersection should be carried out in a cross way.
④ If the steel wire rope has a main fiber core, the rope core should be completely passed along with the first tail end of the first group, and then the exposed rope core is cut off. If the strand has a fiber core, the strand core should remain in the original strand.
⑤ If the wire rope has a separate wire core, the core should be divided into three parts. They are:-two shares,-two shares,-two shares plus its core. These three sections are interspersed with three staggered tail ends and run through only three complete splices.
⑥ If the wire rope has an independent wire strand core, this core should be folded in when the first group is inserted, and the center of the insert head which is completely inserted five times in the upward direction.
⑦ All penetrations should be tightly tightened to match the centerline of the penetration rope. In order to make the plugged parts smooth and round, you should use appropriate tools to shape them into the appropriate position.
⑧ The used collar should match the diameter of the wire rope, and the collar clip should be secure. The arrangement of wire ropes and collars should be as shown in Figure 6-14. See Figure 5-15.
毛 Burrs will inevitably occur at the connector. In order to avoid the operator from scratching hands, etc., the connector should be made of epoxy resin and other special soft plastic cylindrical tools (such as mineral water bottles) after the hook is completed. Pouring seal. Specific steps: Fix the soft plastic cylindrical tool at the joint with a rope or wire, place the wire rope upright, close the lower mouth of the cylindrical tool to prevent the liquid from flowing out, and then pour the epoxy resin liquid into the cylindrical tool Within. Note: When pouring, the liquid should be lower than the upper surface of the tool. After pouring, it should be left standing for more than 24 hours to solidify the epoxy resin.
Introduction of the manufacturer of wire rope fittings
、特种纤维柔性吊装带系列、扁平吊带系列、安全网系列、安全带系列、起重链条系列、横梁吊具系列、冶金夹具系列以及三动工具系列。 Taizhou Putai Rigging Co., Ltd. is a professional manufacturer integrating research, development and production. The main products are various specifications and types of steel wire rope, steel wire rope sling , nylon rope sling , special fiber flexible sling series, flat sling series , Safety net series, safety belt series, lifting chain series, beam spreader series, metallurgical fixture series and three-action tool series. Products are widely used in metallurgy, machinery, railways, petrochemicals, ports, electric power, automobiles, aviation, construction and other fields.
The company has strong technical force, advanced technology, complete testing facilities and excellent quality assurance system. The products are subject to product quality liability insurance by the People's Property and Casualty Insurance Co., Ltd., which has obtained a quality certificate issued by the quality supervision department, and successfully passed the ISO9001-2000 international quality system certification of the classification society. Welcome to come to buy!
： exmpc.com Address: Zhenxing North Road, Tianhe, Taizhou copyright by : exmpc.com